*Core size is bar and plate area only and does not include tanks or plate under tank.
Next-Gen Ranger Raptor
CTB Raptor R Package
Perch Collars
Designed in conjunction with Fenix Radiators, our 2022 Ranger Raptor Intercooler kit replaces the unreliable plastic/alloy intercooler and piping fitted from the factory.
Featuring full aluminium construction, the Fenix Performance Ranger Raptor Intercooler kit offers an increased capacity of 37.5% [Intercooler] and a dyno-proven decrease in IAT's of up to 20°C.
With ease of installation in mind, this kit bolts up with all the OEM fittings & sensors and requires only a handful of basic tools for installation.
*Core size is bar and plate area only and does not include tanks or plate under tank.
*Core size is bar and plate area only and does not include tanks or plate under tank.
CTB Raptor R Package
Before
292kw @5,650 rpm
583nm torque @3,500 rpm
583nm torque @3,500 rpm
After
358kw (+66kw)*
780nm torque (+197nm)*
*Approximate figures, varies between vehicles
Increased IC capacity of 37.5%
Decrease in IAT's of up to 20°C
Decrease in IAT's of up to 20°C
Retain your vehicles remaining factory warranty
$7,200.00
Inc GST.
Compatibility
2022 Ford Ranger Raptor P703 / RA 3.0L 6cyl Turbo Petrol
Components
• Pro-Series Intercooler (Powder-coated Silver [Special Order] or Black)
• Black powder-coated intercooler pipes, black silicone joiners, hose clamps & fittings• Transmission Cooler
• Specialist custom on-dyno calibration
• Specialist automatic transmission calibration
• Build plaque
• Exterior Badges
• Interior Badge
Kit Features
• Core size: 440mm x 185mm x 115mm
• Dyno tested to decrease IAT’s up to 20°C• Increased capacity of 37.5% [Intercooler]
• Bar & plate construction with temperature-efficient inner fin design
• Dual 50mm inlet & 63mm outlet
• CNC fixtures for factory fit of OEM BOV, air temperature sensor & air recirculation pipe
2022 Ranger Raptor
Perch Collars
$400
Inc GST.
Kit Features
Elevate your Ford Ranger Raptor with our Next-Gen Ranger Raptor Perch Collars, featuring a CTB Spring Perch Kit to level your Raptor with no loss of wheel travel or added stress to CV’s.
This kit lifts the nose of your Raptor and levels the front with the rear which fixes the appearance of a nose-diving front end.
This kit lifts the nose of your Raptor and levels the front with the rear which fixes the appearance of a nose-diving front end.
Compatibility
2022 Ford Ranger Raptor P703 / RA 3.0L 6cyl Turbo Petrol
Parts List
- CTB Next-Gen Front Perch Collars x2
- Hex Screw Cap Fastening Bolts x8
- Hex Screw Cap Fastening Bolts x8
Tools Required
- 18mm spanner
- 15m spanner
- 10m spanner
- 8mm Spanner
- 5mm Alen key
- 18mm impact socket
- 27mm impact socket
- Torque wrench
- Rubber mallet
- Clip remover
- Ball joint breaker
- Spring compressor
